Berger tool

Sep. 14/2014
I made Berger tool. I was interested in it for some time. It is a hollowing tool.
1.Blank gouge use the HSS 1/2 "which I made in 2012. Gouge blanks
2.First, Making a polishing jig. Material is cypress 14mm thick.
3.Using the M6 insert nut. Pilot hole is 9mm.
4.Handle of the gouge was interfering with the tool rest of the grinder.
5.Polishing shaped same as a commercial product.
6.Feeling good. I think it's the tool that is suitable for finishing of the box.