1.The material is thick paper with a thickness of 1.16 mm. Mark the position to paste the photo. Size is 170 mm * 140 mm.

2.Print photos on seal paper. And paste it on cardboard.

3.The data is 64 pieces according to the 4: 3 picture. Incidentally, we are making up to 36, 64, 100 pieces of data.

4.Put the side down on the table with the photographic side down. It was cut in about 10 minutes with speed mm / min, output 100%, number of times: 3.

The seal paper used this time has no gloss on the surface.

I think that it is due to the seal paper also that each piece is soft.

Next, I made 36 pieces with photographic paper. The cut surface and the surface are
beautiful, which seems to be more practical.

Enjoy!!