Tray with a three-leaf clover pattern |
Dec. 23/2018 In the laser machine, it is possible to cut out complex patterns, so I tried making a tray of three-leaf clover pattern that I was thinking of challenging with a thread saw. Drawing-1 |
 |
 |
|
1.Material is A-4 size 2.5 mm thick MDF board. Data was drawn in CAD, and DXF file was converted to svg file with Inkscape. |
2.Cut two times at speed 400 mm/min, output 100%. |
|
 |
 |
|
3.Place the cut parts 15 degrees apart.Drawing-2 |
4.Glue together. |
|
 |
 |
|
5.View behind. |
6.Make it colorful by the color of Wato oil. |
|
 |
||
It is completed according to the my image. |
||
 |
||
However, there is no stereoscopic feeling at a thickness of 2.5mm. |
||