It is the wine rack that is essential to enjoy wine.
That I look at the wine on the rack is delightful.
The ready-made article has a different kind but the glass folder the wine rack to introduce here has a characteristic.
The glass folder of this rack becomes a turn method.
The turntable can be stored with five glasses.
It becomes 10 if making a turntable two.
The material used the cryptomeria of 25*60, the pine of 60*60 and the heaven board used a compilation material.
){kind=link}
Next, it manufactures a curved surface and the part of the coupler with the jigsaw.
In such a case, it is early completed correctly when there is a router.
However, I don't have. It completed completely with the hand.
The part which becomes a leg needs the manufacture of the hole.
It opens five to one leg and it opens each hole to 20 in amount.
After manufacturing a sandpaper last, it assembles.
The constructiveness paints and it drums a woodcraft Bond glue into the hole.Let's use a rubber hammer for it.
Also, to make a leg level is important.
The manufacturing of the turntable.
I copies into the board after making a pattern with CAD.
It fixes a shaft on the reverse of the table.
collar is the vibration prevention.
I finds and fixes a smoothly turning position.
The use feeling.
There is a sensation that the crack of the rack is tight a little.
The one with the after width of about 15 mm may be better.
The turntable is Good!! from thinking.
However, you let's be careful of the child.
Because, the glass flies when turning forcefully.
 |  |