I made a coaster together with ice pail.The design adopted to put a black line in the center of it.
The material is ebony and a Japanese oak with 15 mm thickness.
First, I bonds three sheets of boards with the glue.
Then, I makes flat with the plane in its front and back.
Next, I make the jig to cut a ditch.
I made a 73 mm hole in the board with 6 mm thickness with the free paulownia and made it a jig for the trimmer.
Lastly, I puts in a work with the temporary board, I fixes a jig with the tree screw and it reduces it from the center by the U character bit.
I worried about whether or not I use urethane paint for finish or I use oil.
I adopted watocooil.
