Box sushi machine |
Nov. 6/2005 I was requested to make Box sushi machine from the father-in-law. It has the size of sold one's being duple generally. I combined the test run of the ant dove tail guide of Vermont American, and I began making. |
 |
 |
|
1.The material is 1*4.I reduced a thickness to 14 mm in Portable Planer. |
2.I cuts down a part with slide saw. |
|
 |
 |
|
3.I uses dove tail guide of Vermont American and it manufactures a ditch.I make an ant ditch in the lower left corner and the upper right corner of the box in the left side of the guide. |
4.Next, I make the upper left of box and the lower right in the right of the guide.The way of using a guide is simple. |
|
 |
 |
|
5.It is assembly. I was lightly beating with the hammer the space and connected it. |
6.I made the bottom and the cap by using the same material. |
|
 |
||
I pushed brand and It is completion. 240W*150D*55H(mm) |
||