1.Almost, I made dowel pin.ƒÓ10mm*19 length.

2.I use this dowel for the mask of the screw.Because it doesn't have strength.

3.It does squarely by the trimmer.

4.I used biscuit for the joint of the top board in the desk.

5.The top board completed. I wipe it with water before sanding.970 wide * 665 depth

6.Make a side plate.I used the template which was printed out to mark.

7.The jig-saw is used for the clipping.

8.It is a sanding by #320.

9.Make a drawer.

10.Assembly is completed.I made a knob with wood lathe.

11.It ended with Watco oil.Next, I will make a bookshelf.

12.Parts of bookshelf.I cut out a heart mark and a star mark with the jigsaw board.

13.The stave is modeled on bear's shape.and The hinge and the knob were matched to white.

14.The bookshelf is put on the desk and completion.

15.The under angle.

16.This is book end.