Dust collector system |
May. 13/2012 I bought the canister filter for DC-90R. |
 |
 |
|
1.The canister filter for DC-90R made by KERV. The meshes are 1 micron. |
2.The transparent dust bag. |
|
 |
 |
|
3.The nose of the elephant, No.1. It uses this for the slide saw, the jigsaw, the plane. |
4.The nose of the elephant, No.2. It uses this for the wood lathe,the auto plane. |
|
Aug. 24/2008 I bought small dust collector DC-90R2 of KERV. I made a duct and suction nozzle is five. It became easy to use. |
 |
 |
|
1.The main specification of DC-90R 100V,1 HP, 21m3/min |
2.I warm a coupler by burner.To join a shutter to the coupler. |
|
 |
 |
|
3.The suction of DC-90R. |
4.I made duct support with 2*4. |
|
 |
 |
|
5.The U band is a 1.2 mm steel plate. |
6.The duct is an elastic aluminum pipe. |
|
 |
 |
|
7.The elbow part with the shutter. |
8.The shutter to have screwed on the beam. |
|
 |
 |
|
9.Reducer of 75mm. Reducer is inserted in the shutter, and it fixes with the butterfly bolt of M5. |
10.Floor sweeper. It is very convenient. |
|
 |
 |
|
11.Dust collector in scroll-saw.The duct on the table can be fixed at a free position. |
12.The collection port of the VP40A elbow was installed under the table. Its pipe end is diagonally cut. |
|
 |
 |
|
13.An upper duct expands on the table, and 50m/m duct on a horizontal side is connected under the table. |
14.Dust collector in slide-saw.This duct catches dust which flies around the blade. |
|