The ridiculous heat continues in the summer of 2018. It is a very hot weather. Therefore, I installed a spot cooler in the workshop.
Because walls are used for storage, wall-mounted air conditioners can not be installed.
First of all, in order to install a weather cover made of SUS, a hole of 150 mm was drilled in the wall of the color steel plate. 
I bought SUS 304's 150 mm weather cover for 800 yen at the home center. It fixed to the wall with tapping screws.it is waterproof with silicone coking.
Exhaust duct joint in the room.
Spot cooler is SS - 16 MXW - 1 by "Swiden" , cooling capacity is 1.6 KW.
I installed a light shielding net in the glass window of the doorway. Make the bracket to fix the curtain rope with 30 mm aluminum angle.
It seems to be effective.
Because the roof of the acrylic fiber was decrepit-izing, it gave up and it decided to restore complete.
A lot of funds are taken to dismantle and to reform a roof. Therefore, leave the present acrylic fiber roof, It decided to make a new roof on it.
It was complete. It is safe even if the typhoon and the centering cloudburst come in this.
The electric tool increased..
I am the most pleasant when I am in this place. 
The outer wall was complete.I thinks that the wind and rain doesn't approach already.
My workshop is full.
My workshop was introduced for 2002 "Dopa" No.31.Much wonderful Work shop was introduced,too.
In my workshop, tools are stored in the box or the basket.
Therefore, I has noticed that it is not visible appropriate for Workshop.
Then, tools were taken out from the box and displayed.
If a tool was decorated, it came seemingly to be Workshop.
A display is fairly pleasant to it.
The tool of recollections which I bought for it a long time ago also came out.
Cleaning is also sometimes carried out.
I wanted to have an atelier(workshop) from before.It established the carport of 2.7 mH of 5m*3.4m* in 1998.
Then, the strategy which makes it an atelier began.
it is too wide it felt, too, but I became this size because I had a lot of fishing things in addition to the DIY thing.
As for the carport, it is using the one where the roof is near the flat.
This carport has six legs and has strength.
Then, I adopted because it was sold at the reasonable price.
Almost, at first, it is setting-up by the wall.
It made a shell with 2*4 and it put a color steel sheet in the pasting.
It bought a few color steel sheets of 1300 one sheet yen.
Then, it was complete 1 year later.
The wall didn't have a door. The spring this year, I got an aluminum sash at the old house to dismantle.
Because there were 90 cm by five sheets, it made a door west and south.
It made one sheet of the remainder a window.
The rail becomes high because the sash is for indoors. I'm not worried with it.
Anyhow, a wall was blocked. It seems that it is possible to do work in the winter.
Only, because the roof is bronze color acrylic fiber, in the summertime, it is hot.
Next, it wants to put a ceiling.
It is about the wife that it is the gladdest in the completion of the atelier.
The atelier is playing an active part as the wash drying place the rainy time.
Also, because it made a lot of storage shelves, it is using as the place of the safekeeping of the electric fan and heater barbecue thing and so on.
October, 2000. I made a work desk. It can store a tool, too.The size is 700*2400. To equip with the boring machine, the table jigsaw , the vise, it is as necessary as it.
The desk used the plywood of 2*4 and 12 mm. As for the part of the vise installation, it reinforced plywood.
Under the desk, it puts paint, a sandpaper, a metal manufacture tool and so on in the plastic container and it stores them.
Because the container is riding plywood with the caster, the taking-out is easy.
It doesn't go to the cellar and I am easy.
This atelier has a refrigerator, a radio, CD, a television.
I may be able to live here.
