1.I made a bracelet first. The material is camphor tree. It got it from my friend about 2 years before.

2.I use U type byte and turn an outside from the front.

3.Next,I use R type byte and turn an right-side.

4.Last, I separated a ring using the byte of left.

5.I made various rings with size. Is use a quoit or bracelet?

6.The 2nd, I make a egg stand with captive ring.

7.I leaves only the portion of a captive ring and finishes roughly.

8.I use U bytes at first.

9.I separated the ring using R and L bytes.I turning the part of after removing a ring. A temporary stop is carried out on a adhesion tape so that a ring may not dance at this time.

10.I used Ring-chuck for the making bottom.

I think that it seems to be able to do an interesting usage as for this captive ring set.