1. The material is alder. First,I turn to the cylinder.

2.I make a handle part.I make the part which cuts a screw a stair.

3.I paint "Vario Hellcopter" before cutting a screw.It firms a surface and prevents division.

4.I set work in the hand made jig. and, I threading use the double-angle-cutter of 13m/m.

5.Next, I make rattle room.I enlarge a hole by the side scraper.

6.I threading a rattle room.

7.I turn the handle and rattle room together.

8.I use parting tool with 1.5 mm thickness and I detach a handle.

9.The completing of the handle part.

10.The completing of the rattle room.

When the red bean is put and shaken to the inside, a good sound is heard. 50m/mDia*200length