1.The material is ebony and a chestnut. Its width 30 mm,thickness 6mm.

2.I cut plate in the trapezoid with slide Saw.

3.I bond the white and black alternately.I fasten up around it in cable-tie.

4.I push it by the ring press.

5.I use press and I glue together the cherry tree and inlay of bowl.

6.I want sharp by the bowl.

7.I cut ebony.

8.I use a doughnut.

9.The once again press.

10.I think that it became sharp.

11.I used three mandrel buff. It's a hand-made.

12.105mm Dia * 45mm Tall.Carnauba wax finish.