1.Cutting a 60 degree ditch using inlay jig-2.

2.The made part is this.

3.The diamond part. It tilts slide saw by 30 degrees.

4.It glues together a parts.

5.The part 2 of the bowl.

6.The bottom of the bow.

7.Adjusts pattern and it glues together.

8.Gluing all together.

9.Turning of the out side.

10.Turning of the inside.

11.Making of lid.

12.The knob is oak.

13.Uses a button jaw.

14.It seems to be a circus hangar.

160mm Dia * 110mm Tall.beeswax finish.