1.The material is cherry.Turning the outside beginning. It is an opposite procedure.

2.Cutting a ditch with angle 90.

3.The ditch is eight to the circumference.

4.Cutting a triangle inlay to the 65 mm length. The material is the outside rosewood the inner chestnut.

5.Shaving a inlay to right-angled.

6.Bonding on white glue.

7.Turn if dry.

8.Turning in the inside of the goblet. Attention the vibration.

9.Complete the root of the leg.

10.Grasp once more, and turning the reverse of the leg.

80mm height, 80mm diameter. Urethane finish.