1.The material is beech.Thickness to be 14 mm by drum sander.

2.Pasting drawing with spray glue.It is the 1 to 3rd step of doll.

3.Cutting in the shape of a disk.

4.Cutting the parts.

5.The 4 to 5rd step of doll.

6.All the cuttings were completed.

7.Make the hole into which the stick supporting a fish is put.

8.Making a jig of samurai hands.

9.Make a hole with the stick of a drum.drawingof jig.

10.It is the "eyeball jig" of a carp.

11.Insert an 8-mm round bar.

12.And cutting. The cut eyeball is fitted over the next hole and the hole of a center portion is made with a 2.4-mm drill from the side.

13.Make a sumou wrestler topknot. A diameter is 6 mm.

14.Cut using a jig.

15.Ten samurai dool was completed.

16.Next,Making a box. The material is Zelkova tree.

17.Turning.

18.Fun Fun turning.

19.Cutting.

20.Turning the inside of box.

21.Exchange on the three nail chuck.And turn over a work.It binds tight in a hose band so that it may not be divided.It is Safety First.

22.Insert a work in a jig. And push in a tail stock.

23.Turning a lid.

24.Make a knob.Material is a Padoauk.

25.Exchange on the three nail chuck.

26.The box was completed.It colored in wotoco oil.

27.It colors using an acrylic paint.

28.Samurai dool was put into the box.It is good.

29.Making a tiered stand for dolls. Material is pine. drawing.

30.The Stairs were completed.

31.Let's assemble.

32.This is the brand iron which I made.

33.Making a storage box of samurai doll. First,Cutting a ditch using the straight bit of 8 mm. drawing.

34.Let's assemble.

35.The heating of the branding iron.

36.Pushed the mark at the bottom left of the shutter.

37.Wrote in acrylic paint. It is a traditional Japanese style.

38.Put the storage box all the parts.

My wife made the curtain.

I gave grandchildren this doll.