1.Material is a magnolia. Useing roughing gouge.

2.First, Making a pedestal. Drilling pilot holeof 14 mm.

3.Making a pilot hole of 14 mm. Next, Drilling 35mm.

4.Cutting.

5.Making a cap part. Drilling 25mm.

6.Turning an outside to 35 mm. I adjust so that pedestal may insert it nicely.

7.Uniting with a pedestal and cap. Turning an outside uniformly.

8.Turning an end face.

9.Carve the slot of the air vent port.

10.The price of felt was 100 yen.

11.Cutting felt in width of 73 mm.

12.Roll up a felt and insert in a cap part. and pour out camellia oil.

13.Using a urethane paint so that oiler does not stain by oil.

14.Keeping felt fabric in the reverse side.