1.I studied the combination of Kenzan and Tupperware. But that was not a good idea. Right sade a material for ikebana called �hkenzan".

2.I was this Kenzan mountain that I found in �hRakuten�h at such time. It seems to be said that "Hana otoshi dome". I bought some of the smallest ones.

3.Make Galaxy 2 first. The material is Camphor. Turn one side flat by screw chuck.

4.Mark the base of vase with a compass.

5.The surface is gradually scraped while matching the pattern.

6.Finished the base part.

7.Drilling a 25mm Dia 15 mm deep with a forstner bit.

8.Gripping reverse. Then turning the surface curved.

9.Drilling a through hole of 25 mm.

10.After sanding at # 240, # 320, finish with # 0000 steel wool.

11.Drilling a 35mm Dia 23 mm deep with a forstner bit.

12.Dipping it in the perilla oil, and buff finish after drying.

The rings are beautiful.

On the back side I pushed the brand-brand of the sweetfish.

I think that when I look at this vase from the side it resembles the galaxy.

I made a galaxy No. 1 with a diameter of 150 mm. The material is hiba arborvitae.

I arranged the flowers.