1.The material with the faceplate using the screw.

2.First, turning the outlside. And make a grip margin.

3.When turning inside, it is safe to use the S-shaped tool rest.

4.Coniferous trees are so soft that they if do not use a sharp blade, the surface gets broken.I made a finish with my own Japanese style gouge.

5.Grasp it with a vacuum chuck to shav off the grip margin.

6.Centering with dial gauge.

7.Cut the grip margin and sanding it. OD 262mm,H 62mm.

8.To mark the brand mark use FABOOL Laser mini.

9.Engraved with laser.

10.The brand mark is 60 mm in diameter.

My bowl is characterized by a slightly concave edge part.Urethane finish.

View from the back side.