1.The material of the pedestal part is beech. First of all, cut it out into a disk shape with a saw blade.

2.Lower pedestal. Drilling 15 mm for round bar.

3.This is the upper pedestal. The hole should penetrate so that a long pillar can be inserted.

4.First, make a hole with a 20mm Forstner bit.

5.Expand the central hole to 21mm with a wood lathe.

6.Shave the center of the bottom part of the lower pedestal so that It can sit horizontally.

7.The top of the lower pedestal will hit the board of the jumping pedestal, so make a large chamfer.

8.This is Jump boy's head. Make a sphere while matching the template.

9.6mm spot facing for a neodymium magnet.

10.The body uses a 29 mm round bar. Drilling 12mm through the arm bar.

11.The board of the jump stand is 6 mm thick cherry wood. Drilling 2.6 mm to insert stud pin.

12.For the stud pin, use a 2.6 mm SUS welding rod core material. Since the covering material remains around the rod, sanding it on a lathe.

13.Grinding both ends of the jump base.

14.Make a 6mm wide groove on the pillar. Actually, it can be cut accurately by setting a router race, but it was troublesome, so I cut it by sandwiching it with timber.

15.Turning the outer circumference of the pedestal to make it a perfect circle.

16.Engrave the logo mark to the back side of the lower pedestal with the laser machine.

17.This is the disc that the jumping boy's sticks . There is a hole through which the pillar is inserted, and 13 mm neodymium is embedded. Drill a pilot hole to embed a M4 insert nut to secure the disc.

18.I was wondering what the jumping boy's face should look like, but I chose Baikinman. This was done by marking the outline of the face with a laser machine and then painting it black with water-based acrylic paint.

19.Insert the Baikinman doll into the hole and hit the bottom jumping table to jump up and stick to the upper disk.

20.It is difficult to hit the jump table if it is too weak, and it will be played if it is too strong. I think it's a good toy for kindergarten children rather than two-year-olds.

21.Meronpanna also rocketed. A flat screw is screwed over the head.

22.It seems that two bodies are competing for the catch at the top position.