| Introduction | Mount of a trimmer | Adjuster | Throat plate,Riving knife | clamp and dust collect port and blade |

| Out feed roller | Mount of a PORTER-CABLE 893 router | Dust collector for 893 router | Remodel the router fence |

| Miter slot-bar | Cross cut Jig | Ripping Jig | Anti-Kickback Safety Rollers | Insert ring |

1.Material is PVC socket for union joint.

2.Pasting it to the port.

3.It would not be fall out.

1.First, Port of dust collector for fixed-base. Remove assist grip. and Tapping M6.

2.The material is a 2mm aluminum plate, and hose nipple for washing machines, and urethane foam sheet.

3.Wind a vinyl tape around a nipple so that a hose doesn't come off.

4.Insert a hose of a cleaner.

5.Next, Port of dust collector for plunge-base. Drawing

6.This production point in this port is to process it so that a nipple of a washing machine may bite a handle of the router. Cutting nipple to 6 points. and warming with a burner.

7.Install dust collector in the router.

8.Connect a hose of a cleaner.